Publicidad
Idiomas disponibles
Idiomas disponibles
9. Perform a new scan as indicated in the previous points by
slowly moving the instrument from left to right in the space
between the 1st and 2nd marker
10. Mark the surface with the 3rd marker and the 4th marker
(see Fig. 4 - right part)
11. The hidden object will be in the space between the 3rd
and 4th marker. The distance between these two new
markers must be about 6cm (2in) (almost the size of the
instrument itself
•
•
•
6. BATTERY REPLACEMENT
When the "
must be replaced. Follow the below instructions:
1. Open the battery cover
2. Remove the battery and replace it with new one of the same
type (see § 7)
3. Replace battery cover
4. Do not scatter old batteries into the environment. Use the
relevant containers for disposal
The calibration must be performed on a
homogeneous and uniform surface in
order to avoid reading problems. In the
case of a rough surface, place the
instrument on a piece of cardboard
To avoid interference, keep the free hand
at least 15cm (6in) away from the
scanning surface
The instrument does NOT scan metals
materials in the presence of walls with a
depth greater than 50mm (2in)
" low battery indication is displayed the battery
CAUTION
Publicidad
