Descargar Imprimir esta página

Hisense RW3N230GELF Manual De Operación página 52

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 78
Safety and warning information
•Transmitting frequency band(s) and max allowed
transmitting power in the operating frequency
band(s): 2400-2483.5MHz, less than or equal to 20dbm.
•This equipment should be installed and operated with
minimum distance 20cm between the radiator & your
body.
Attention
Keep ventilation openings clear of obstruction.
•Care must be taken to ensure that the appliance does
not stand on the electrical supply cable. Important: if
the power cord is damaged, it must be replaced by a
special cord or assembly available from the
manufacture or its service agent.
•Do not use extension cords or ungrounded (two prong)
adapters.
•If the appliance is transported horizontally, it is
possible that the oil contained in the compressor flows
in the refrigerant circuit. It is advisable to wait at least
two hours before connecting the appliance to allow
the oil to flow back in the compressor.
12

Publicidad

loading