Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Problem
Unusual noises
The compressor
does not start
immediately
after changing
the
temperature
etting.
Unable to
connect
appliance to
Wi-Fi network
1. Appliance is not level.
2. The appliance is touching the wall or other objects.
3. A component,e.g. a pipe, on rear of the appliance is
touching another part of the appliance or the wall.
1. Readjust the feet.
2. Move the appliance slightly.
3. If necessary, bend the component out of the way
carefully.
1.This is normal, no error has occurred.
2.The setting temperature is higher than the ambient
temperature.
1.The compressor starts after a period of time.
2.Set the temperature lower than the ambient
temperature as you want.
1.The password for home Wi-Fi network was entered
incorrectly.
2.The home Wi-Fi router frequency is not 2.4GHz.
3.The router and appliance kept far apart causing the
poor network.
1. Make sure the password is correct and connect again.
2.The appliance only supports 2.4GHz radio frequency.
Set up a dedicated 2.4GHz Wi-Fi SSID and connect the
appliance to it.
3.Consider either moving the router closer to the
appliance or purchasing Wi-Fi range extender and
installing it.
Possible cause & Solution
34
Publicidad
