Hisense RW3N230GELF Manual De Operación página 62

Display controls
Temperature Measure Change
You can change the temperature
display setting from Celsius to
Fahrenheit degrees by touch the
" "key for 3 seconds,and vice versa.
Temperature regulation
You can set the temperature you
desire by touch the key "
The temperature will increase 1°C or
1°F each time you touch the UP key
and will decrease 1°C or 1°F each time
you touch the DOWN key.
NOTE:
•The appliance doesn't work properly
if the set temperature is higher than
the ambient temperature.
•The temperature range is from 5°C(
41°F) to 20°C( 68°F).
•When you set a temperature, you set
an average temperature for the
whole cabinet. There may be a2°C (
3.6°F) to 3°C ( 5.4°F) variance
between the top and bottom
shelves of the appliance.
Sabbath mode
In the unlocked state ,touch and hold
the"
control panel and the "
more than 3 seconds to enter the
Sabbath mode, the control panel is
off, the key does not respond, the
buzzer does not respond, until it
" o r " ".
automatically quit for 80 hours or
long press the key combination
again.
Filter expiration alarm
When the filter exceeds the set
time, the"
press the "
side of control panel and the "
key for 3 seconds to reset the filter
time.
After the reset, the filter icon will be
off. The alarm time is six month and
can be set through the ConnectLife
app.
Over Temperature Alarm
In order to avoid a the temperature
problem that could affect the quality
of the wine, the appliance has an
over temperature alarm function.
When an over temperature alarm
occurs, cancel the alarm by pressing
" key that is on the right side of
"icon is steady on. Long
"key that is on the right
" key for
"
22