Bosch BMCT-SLZ Guía De Uso página 11

Light/shutter control II
Installation/configuration as a shading module
݃ Before you start: Be sure to shut off the power circuit breaker!
Connect the module in accordance with the following connection diagram:
Motor connection diagram
Connection Description
External conductor
L
N Neutral conductor
S1 Up button/switch
Down button/switch
S2
݃ The end positions of the drive must have already been set up /
configured in advance. To do this, follow the instructions on your drive.
݅ If the module has not been paired with the Smart Home controller and
configured with the shading function, the inputs S1/S2 do not trigger
any movement.
If the module is connected correctly, switch the fuse back on.
↑Contents
8-750-002-899 | V001 | 06/2024
Connection Description
Motor up connection
Q1
Q2 Motor down connection
PE Earth conductor
English | 11
Bosch Smart Home