Publicidad
Idiomas disponibles
Idiomas disponibles
Light/shutter control II
Product overview
Item Name
1
System button
2
Status LED
Terminals
3
Mounting instructions
▶ The standards and directives applicable in your country must be
observed during planning, set-up, operation and maintenance.
▶ The device is part of the building installation. Operation of the device is
only permitted on a 230 V/50 Hz AC mains. Work on the 230 V network
may only be carried out by an electrician. The applicable accident
prevention regulations must be observed here. To avoid an electric shock
on the device, please switch off the mains power. Failure to observe the
installation instructions may result in fire or other hazards.
▶ Mounting must be carried out following the applicable requirements.
Failure to observe the requirements may result in damage to property
and/or injury, or even danger of death.
▶ Please also note any additional information on the product.
▶ The product is only intended for fixed installation in in-wall switch boxes
with a minimum depth of 50 mm and a screw distance of 60 mm in
indoor areas.
▶ When connecting the device terminals, ensure that permitted wires and
wire cross sections are used.
↑Contents
8-750-002-899 | V001 | 06/2024
2
1
3
English | 8
Bosch Smart Home
Publicidad
