Publicidad
Idiomas disponibles
Idiomas disponibles
MATING MECHANISM
• It consists of a lever fitted with two half-flanges [A] and a set
of two half-flanges with hooking roller [B].
• The lever and the two half-flanges with roller are delivered
in separate bags. Both bags also include the screws needed to
assemble them on both sides as well as a ferrule to attach the
cap.
1 pc
-
• The lever can be assembled
- socket/connector side [C] with the longer screws and
spacers, or
- plug/appliance inlet side [D] with the shorter screws.
The lever is generally assembled on the fixed device. The half-
flanges with rollers are then assembled on the
complementary device.
IS 22 [SPeX] Rev B.1 - 2023-12
-
4 pcs
1 pc
4 pcs
23/97
4 pcs
4 pcs
.
4 mm
2 Nm
-
1 pc
-
1 pc
,
Publicidad
