Marechal Electric SPeX Instrucciones página 27

►OPERATION
• Check the lubrication of the O-ring on the plug/inlet. If
necessary, use silicone grease.
• Partially pair the two devices (1), holding the mobile device,
and terminate the connection using the lever (2) until you
hear the connection click. Pull on the mobile device to verify
that it is properly hooked (the mobile device and its flexible
cable must not exert stress on the fixed device, see
WARNINGS).
• (3) Turn the ring of the socket-outlet towards "1" up to the
stop, to lock the devices and close the pilot circuit.
• To open the pilot circuit and unlock the mobile device, turn
the ring to the "0" position (4), raise the lever (5) and press
the button (6).
4. Put the cap back in place.
IS 22 [SPeX] Rev B.1 - 2023-12 27/97 .
,