Marechal Electric SPeX Instrucciones página 24

WARNING!
Observe the direction in which the two half-flanges with
rollers are fitted on the devices.
CAPS
For the socket-outlet/connector, place the terminal located at
the end of the cap chain under the head of one of the bottom
fixing screws.
To ensure the IP rating, the socket-outlet cap must be
assembled with its slot in front of the socket-outlet protruding
finger.
METAL ADAPTER
Respect clearances and creepage distances according to the
operating voltage of the main and auxiliary circuits.
IS 22 [SPeX] Rev B.1 - 2023-12 24/97 .
,