Publicidad
Idiomas disponibles
Idiomas disponibles
GB MT
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated value de-
pending on the manner in which the power
tool is used.
Try to keep the exposure to vibrations as
low as possible. Examples of measures to
reduce vibration exposure are the wearing
of gloves when using the tool and limiting
the working hours. For this purpose all parts
of the operating cycle have to be consid-
ered (for example, times when the electric
tool is switched off and times when it is
switched on but running without any load).
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration of
conformity.
Charging time
(min)
PLG 20 A1
PLG 20 A4
PLG 20 C1
PLG 20 A2
PLG 20 A3
PLG 20 C3
PDSLG 20 A1
Smart
PLGS 2012 A1
Safety Information
This section describes the basic
safety rules when working with the
machine.
In the case of an accident or
malfunction during opera-
tion, the machine must be
switched off immediately.
22
PAP 20 A1
PAP 20 A2
PAP 20 B1
60
45
35
35
35
Charging time
The device is part of the Parkside X 20 V
TEAM series and can be operated with
batteries of the Parkside X 20 V TEAM series.
Batteries of the Parkside X 20 V TEAM
series may only be charged using chargers
of the Parkside X 20 V TEAM series.
We recommend that you operate this ap-
pliance with the following batteries only:
PAP 20 B1, PAP 20 B3, Smart PAPS 20 A1,
Smart PAPS 208 A1
We recommend charging these bat-
teries with the following chargers:
PLG 20 A3, PLG 20 A4, PLG 20 C1,
PLG 20 C2, PLG 20 C3, PDSLG 20 A1,
Smart PLGS 2012 A1
An up-to-date list of battery compatibility
can be found at: www.lidl.de/akku
PAP 20 A3
PAP 20 B3
90
120
60
80
45
60
45
60
40
40
Injuries must be properly treated or
medical assistance sought. Read
the "Troubleshooting" section to
correct any malfunctions or contact
our Service Centre.
Smart
PAPS 204 A1
PAPS 208 A1
120
80
50
50
40
Smart
210
165
120
120
50
Publicidad
