Publicidad
Idiomas disponibles
Idiomas disponibles
maintenance instructions.
• Wear protective gloves when
changing the cutting device.
• Regularly check the grass col-
lection device for wear and
strains. For safety reasons, re-
place worn or damaged parts.
When adjusting the blades,
take particular care to avoid
fi ngers being trapped between
the rotating blades and fi xed
parts of the machine.
• Check that only replacement
tools authorised by the manu-
facturer are used.
Electrical Safety:
• The plug of the charger must fi t
into the socket. The plug must not
be modifi ed in any way. Do not
use any adapter plugs together
with electric tools that have a
protective earth. Unmodifi ed
plugs and matching sockets re-
duce the risk of electric shock.
• Avoid body contact with
earthed surfaces such as pipes,
radiators, cookers and refriger-
ators. There is an increased risk
of electric shock if your body is
earthed.
• Do not expose electric tools to
rain or wet conditions. The pen-
etration of water into an electric
tool increases the risk of electric
shock.
• Do not use any accessories that
are not recommended by PARK-
SIDE. This can result in electric
shock or fi re
Observe the safety infor-
mation and notes on charg-
ing and proper use as shown in
the instruction manual for your
battery and charger from the
Parkside X 20 V Team series. A
detailed description of the charg-
ing process and further informa-
tion can be found in the separate
operating instructions.
Assembling instructions
Assemble pipe and handle
1. Push the pipe (4) onto the fork (5) on
the housing (8).
The lug on the pipe must be inserted
into the groove on the thread.
Make sure that the machine cable (9) is
not squashed.
2. Screw the coupling nut (3) hand-tight.
3. Put the pipe with gripper (1) onto the
pipe (4).
The lug on the pipe must be inserted
into the groove on the thread.
Make sure that the machine cable (9) is
not squashed.
4. Screw the coupling nut (3) hand-tight.
Operation
The mower must only be set
when the motor is switched
off and the blades are shut-
down. There is a risk of per-
sonal injury.
Switch of the device, pull the ig-
nition key (11) and wait for the
blades to come to a stop.
GB
MT
27
Publicidad
