Programming By Keypad - Bentel Security BTEL-GT Manual De Instalación Y Usuario

Installer Menu

PROGRAMMING BY KEYPAD

To enable clear and quick programming, voice menu support is provided in various languages. When a language
is selected, the programming voice menu in the selected language will be activated. The BTEL-GT can also be
programmed in one language and then used in another. By pressing a combination of keys, you choose the
parameter that you want to modify, after which you enter the desired value for that parameter. Press the
to exit the current menu and go back (if no keys are pressed, the voice messages for each level of the menu will
be repeated 3 times before returning to the previous level). Press the
combination of keys that you want to press, you can speed up the programming by entering the sequence while
the voice message is playing without having to wait for the entire message to be played.
D
Pressing the key continuously for 3 seconds from any level of the menu allows you to return to standby
mode. This feature is valid only while going through the menu or during programming, even if a voice
message from the menu is being played. To return to the menu, you will need to re-enter the Installer Code.
If you make use of this function during programming, any parameters introduced will be
ignored.
GSM Telephone dialler
Phone
Parameters for
for
Book
Management
Management
Available
for
Networks
Management
for
Installer
Code
Exit
for
Management
for
Options
Calls
Advanced
for
Management
Back
for
Listen
for
Record
for
Back
for
Management
for
Input Polarity
Periodic
for
Message
Language change
for
Date, Time
for
Management
Output
for
Management
Back
for
C
key to accept the value. If you know the
Write Phone
for
Book
Read Phone
for
Book
Delete
for
Back
for
G
Call Handling on
for
Input
Management
for
Repetitions of
Voice Message
Management Call
for
Cycle
Management
for
Call All
Management Call
for
Confirm Result
Back
for
Output Type
for
Management
Output Polarity
for
Management
Output Caller
for
Recognition
Enable
Confirm Output
for
Activation Enable
Back
for
D
key
11