Shop-Vac SS16 Serie Manual Del Usuario página 10

No lubrication is necessary as the motor is equipped with lifetime lubricated bearings.
Before storing your vacuum the tank should be emptied and cleaned. Never allow liquids
to sit in the tank for any extended period of time. The power cord can be wrapped around
the cord wraps provided on the tank cover on rear of unit. The vacuum should be stored
indoors.
Do not attempt to service your Shop-Vac
Refer all other servicing to a qualified service center.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES
Parts/accessories 1. Packed in tank
missing
Vacuum cleaner 1. No power at receptacle
will not start 2. Defective switch
3. Defective motor
Dust discharging 1. Filter not installed/not installed
from exhaust properly
2. Filter damaged
3. Filter clogged or dust is too fine
4. Filter not functional
Loss of suction 1. Loose hose connection
2. Filter clogged
3. Full tank
4. Hole in hose
Static shock 1. Dry environment
2. Relative humidity of air is low
Misting in the 1. Saturated filter
exhaust air
LUBRICATION
STORAGE
SERVICE
wet/dry vacuum cleaner beyond that described in this manual.
®
SOLUTION
1. Check in tank
1. Check for power
2. Contact Shop-Vac
3. Contact Shop-Vac
1. Properly install filter
2. Replace filter
3. Use more efficient filter
4. Clean or replace filter
1. Tighten hose connection
2. Clean or replace filter
3. Empty tank
4. Replace hose
1. Add moisture to air (if
2. This situation is temporary
1. Replace saturated filter
®
customer service
®
customer service
practical, use a console
or installed humidifier).
and does not affect the use
of the vacuum cleaner.
with a dry filter.
PAGE 9