en-us_main.book.book Page 60 Monday, October 30, 2023 10:14 AM
60 MAINTENANCE
2
Fully insert the hinge arms
until the indentations
rest on the bottom edges of the slots.
a
Hinge Arm
b
Bottom Edge of Slot
c
Indentation
3
Slowly open the door fully. Make sure that the
hinge arms are properly engaged in the slots.
4
Lift up the hinge lock
c
oven
until it clicks into position.
Unlocked Position
a
Slot
b
Hinge Lock
c
Oven Frame
d
Hinge Arm
5
Close the oven door.
a
b
into the slots
c
on the hinge arms
b
and flip it towards the
Locked Position
Removing/Assembling Drawers
Removing Drawers
CAUTION
• Disconnect the electrical power to the range at
the main fuse or circuit breaker panel. Failure to
do so can result in severe personal injury, death,
or electrical shock.
Most cleaning can be done with the drawer in
place; however, the drawer may be removed if
further cleaning is needed. Use warm water to
thoroughly clean.
1
Fully open the drawer.
2
a
Unscrew the screw
on the side at the back
of the drawer.
3
Locate the glide lever on each side of the
drawer. Push down on the left glide lever and
pull up on the right glide lever.
a
Lever
b
Push down with finger
c
Pull up with finger
4
Pull the drawer away from the range.
Assembling Drawers
1
Pull the bearing glides to the front of the
chassis glide.