SOMFY Sonesse 30 RS485 Manual De Instrucciones página 9

Sonesse 30 RS485
NOTICE
The wiring guide is available for download at https://www.somfy.com/projects/
downloads
2.2.Commissioning
Two tools are available to set the drive.
▪ RS485 SETTING TOOL: Connect the RS485
SETTING TOOL to the drive switch on and
follow the instruction on the RS485
SETTING TOOL.
NOTICE
• For Weidmuller connection, use the setting cable ref 9019873.
• The SDN Config Tool is available for download at https://www.somfy.com/
projects/downloads
• When setting end limits, take care that the load bar remains free at upper
end Limit.
▪ SDN Config Tool: Somfy Digital Network Configuration Tool.
NOTICE
These instructions apply to all Sonesse 30 RS485 drive, the different versions of
which are available in the current catalogue..
2.3.Tips and advice on installation
2.3.1.Questions about the drive?
Observations
The motorised
product does
not work.
©
Copyright 2022 SOMFY ACTIVITES SA. All rights reserved.
Possible causes
"Power" or "datas" wiring are
incorrect.
The drive is in thermal
protection mode. LED
Red = ON then lights OFF.
Solutions
Check the wiring and modify it if
necessary.
Wait for the drive to cool down
to restart the drive.
Do not touch the drive: risk of
burns.
EN
9