Xiaomi S20 Manual Del Usuario página 11

How to Use
Quick mapping
A er the robot vacuum connects with the app for the first time, follow the
instructions in the app to quickly create a map, and the robot vacuum will start
mapping without cleaning. Once it has returned to the charging dock, the
mapping process is completed and the map is saved automatically.
Preparation before mapping:
• Ensure the robot vacuum has been fully charged and starts from the charging
dock.
• Open the doors of the rooms to be mapped, follow the robot vacuum
throughout the whole process, and remove the items that may prevent the
robot vacuum from accurately mapping.
• It is recommended to block areas where the robot vacuum may get stuck or be
scraped, and other areas unsuitable for it to enter.
Se ing up virtual walls or restricted areas a er mapping:
• It is recommended to set up virtual walls or restricted areas in areas where the
robot vacuum may get stuck or be scraped, and other areas unsuitable for it to
enter.
• Set up virtual walls or restricted areas to exclude carpeted areas before
mopping to prevent the carpet from ge ing wet.
• It is recommended to set up virtual walls or restricted areas in areas with
long-hair or fringe carpets to prevent entanglement with the robot vacuum.
Starting vacuuming & mopping
1. Press and hold the 2-in-1 water tank release bu on to remove the water tank.
Open its lid, fill it with clean water, and then close the lid.
CAUTIONS:
• When filling the 2-in-1 water tank with water, adding liquid such as hot water, detergents, or
disinfectants is strictly forbidden. Otherwise, the robot vacuum could be damaged.
• The functions of the robot vacuum are tested before leaving the factory, so there may be
some water residues in it. This is normal.
2. Install the mop assembly onto the 2-in-1 water tank as illustrated.
10
Open the lid and
fill with water
2-in-1 Water Tank Release Bu on