Xiaomi S20 Manual Del Usuario página 12

3. Insert the 2-in-1 water tank with the mop assembly into the robot vacuum as
illustrated. It is properly installed when you hear a "click". Press the bu on
to start vacuuming and mopping.
1
CAUTION: Remove the 2-in-1 water tank and empty it promptly a er a mopping task has been
completed. Then clean and dry the mop pad to prevent odor and mildew.
To only use the vacuuming function, remove the mop
assembly.
Pause
When the robot vacuum is running, press any bu on to pause. Press the bu on
to resume cleaning.
Note: The robot vacuum will enter sleep mode a er being paused or on standby for 10 minutes.
Press any bu on to wake it up.
Adding water or cleaning the mop pad
When the robot vacuum is working, pause it then remove the 2-in-1 water tank to
add water or clean the mop pad. Then reinstall it, and press the bu on
resume the task.
2
Docking
During its working, press the bu on
the bu on again to start docking.
When the robot vacuum is in standby mode and not connected to the charging
dock, press the bu on
When a task is completed or its ba ery is low, the robot vacuum automatically
returns to the dock to charge.
DND mode
In the do not disturb (DND) mode, the robot vacuum does not resume cleanup,
perform scheduled cleanups, or play voice prompts, and the indicator of the
vacuum turns off a er 10 seconds of charging. The DND mode can be enabled or
disabled in the app.
Note: Please refer to the app for more functions. Details of each function are subject to the
app.
11
to pause the robot vacuum, and press
to start docking.
to