Xiaomi S20 Manual Del Usuario página 14

Cleaning the side brush and brush
1. Pull out the side brush upwards.
2. Press brush cover clips to remove the brush cover, take out the brush, and pull
out the brush bearing.
3. Use the cleaning brush to clean the side brush and brush.
4. A er cleaning, reinstall the brush bearing, brush, brush cover, and side brush
in order.
Brush Bearing
Side Brush
Cleaning the Brush
Cut hair
Brush Cover Clip
Brush Cover
Brush
Clean dirt
Part Cleaning
Frequency
Side brush
Every 2 weeks
Brush
Weekly
Filter
Weekly
Brush cover
/
Mop pad
A er each use
Note: Replacement frequency is for reference only. If a part is damaged, it should be replaced
promptly to ensure efficient cleaning.
Common Issues
Issue
The robot vacuum
cannot be turned on.
The robot vacuum does
not start cleaning.
13
Replacement
Frequency
3–6 months
6–12 months
3–6 months
3–6 months (or upon wear)
3–6 months (or upon wear)
Possible Cause and Solution
The ba ery level is low. Fully charge the robot
vacuum and try again.
The ambient temperature is too low (below 0°C)
or too high (above 40°C).
The ba ery level is low. Fully charge the robot
vacuum and try again.