Xiaomi S20 Manual Del Usuario página 16

Error Prompt Possible Cause and Solution
Place the robot vacuum The robot vacuum is tilted at startup. Move it to
on a horizontally flat floor a horizontally flat floor and restart it. You can
surface and start it. also reset the level of the robot vacuum in the
Mi Home/Xiaomi Home app, then turn it off and
restart it.
Couldn't return to the Manually place the robot vacuum onto the
dock to charge, please charging dock and check if the charging
move the robot vacuum dock is connected to power.
to the charging dock.
Remove any obstacles The robot vacuum may be caught or stuck.
around the robot Clear away any obstructions around it.
vacuum and try again.
Make sure the laser Clear any foreign objects that may block or
distance sensor is not obstruct the laser distance sensor, or move the
blocked before starting robot vacuum to a new place and restart it.
the robot vacuum.
Please wipe the cliff Part of the robot vacuum may be off the ground,
sensors clean. Move the re-position the robot vacuum and restart it. Or,
robot vacuum to a new the cliff sensors may be dirty, wipe them clean.
place and restart it.
Check and remove any The collision sensors may be stuck. Gently tap
foreign objects from the them several times to remove any foreign
collision sensors. objects. If nothing falls out, move the robot
vacuum to a different place and restart it.
Specifications
Robot Vacuum
Name
Model
Rated Voltage
Rated Power
Charging Voltage
Item Dimensions
Ba ery Capacity
Net Weight
Wireless Connectivity
Operation Frequency
Maximum Output Power
Under normal use of condition, this equipment should be kept a separation
distance of at least 20 cm between the antenna and the body of the user.
Charging Dock
Model
Rated Input
Rated Output
Item Dimensions
15
Robotic Vacuum Cleaner
D106
14.4 V
45 W
20 V
ø 325 × 98 mm
2900 mAh (rated capacity)
3200 mAh (nominal capacity)
3.4 kg
Wi-Fi IEEE 802.11b/g/n 2.4 GHz
Bluetooth 4.2
2400–2483.5 MHz
< 20 dBm
CDZD106
20 V 0.6 A
20 V 0.6 A
146 × 122 × 98 mm