cecotec ENERGYSILENCE 1600 MOSKITO Manual De Instrucciones página 21

ENGLISH
3. Speed decrease button
4. Timer button
5. Power button
6. Mode button
7. Mosquito-repellent function button
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
This appliance is packaged in a way as to protect it during transport. Take the device out
-
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- Fan
- Remote control
CR2025 battery (x1)
-
- Instruction manual
3. ASSEMBLY
Fig. 1
1. Remove all fan parts from the box.
2. Place the bracket (16) on the base (17) and fix it using the fixing screw (18).
3. Place the main frame (10), including parts 8-12, on the tube (14) and fix it using the fixing
nut (13).
4. Place the back grille (7) on the motor (8) and fix it using the back-grille fixing element (5).
5. Place the blades (4) on the motor (8) through the back grille (7) and fix them using the
fixing cap (3).
6. Place the decorative ring (1) on the front grille (2) and fix it using the grille ring (6).
40
ENERGYSILENCE 1600 MOSKITO
4. OPERATION
1. Place the fan on a flat, dry surface and insert the plug into a power socket. A beep will
sound, indicating that the fan is plugged in.
2. No function can be used until the fan is switched on.
3. The appliance can be operated by using the control panel on the main frame or by using
the remote control provided.
On/off
If you press this icon/button, a beep will sound, and the fan will start. By default, the fan
-
will run in Normal mode and at speed number five. This number, together with the Normal
mode indicator light, will be shown on the display.
- If you press this icon/button a second time, a beep will sound, and the fan will switch off.
Any indicator lights that were on (except the one indicating that the fan is connected to the
mains) will also turn off.
- You will only be able to select the speed (1-10), using the corresponding icon/button for
this purpose if the fan is operating in Normal mode.
Timer
- When the fan is running, you can set the timer to switch off automatically after the set time
has elapsed.
The minimum operating time you can select is 1 hour, the maximum is 12 hours. When you
-
have selected the time, the corresponding indicator light will light up.
- Each time you press this icon/button, an hour is added to the operating time. When you
have selected the desired time, the display will show the selected number (1-12) and the
corresponding indicator light will light up.
- The fan will automatically switch off after the set time has elapsed.
Note: if the timer is activated, it will not affect the rest of the functions, you can continue to
select them as usual.
Mosquito-repellent function
- Insert the mosquito tablet into the mosquito tablet slot.
By pressing this icon/button, the function will be activated, and the corresponding
-
indicator light will light up on the control panel.
- By pressing this icon/button again, the function will be deactivated, and the indicator light
will turn off.
The mosquito-repellent function is independent and does not affect other functions.
-
ENGLISH
41
ENERGYSILENCE 1600 MOSKITO