Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Oscillation
-
Press the oscillation icon/button to activate the oscillation function (from right to left).
The corresponding indicator light will light up on the control panel.
Press the oscillation icon/button again to deactivate automatic oscillation. The
-
corresponding indicator light will turn off.
Mode button
When the fan is operating in Normal mode, you can select the desired mode by pressing
-
this button.
-
The modes of operation are as follows: Sleep or Natural: if you select either of these two
modes, the corresponding indicator light will light up.
If you exit these modes, the fan will go back to Normal mode and the indicator light of the
-
previously selected mode will turn off.
-
Please note: if you choose Natural mode or Sleep mode, you will not be able to set the
speed. When the fan is operating in Normal mode (not in Natural mode or Sleep mode), you
will be able to set the desired speed.
-
You can choose between 10 speeds. When you have selected the desired speed, the display
will show the selected number (1-10) and the corresponding indicator light will light up.
Operation of modes
The fan has 10 speeds. 1 to 3 is considered low speed; 4 to 6 is considered medium speed; and
7 to 10 is considered high speed.
1. Natural mode
-
Low speed: 2 - 2 - 0 - 6 - 6 - 2 - 2 - 2 - 6 - 6 - 0 - 10 - 2 - 2 - 2 - 6 - 6 - 2 - 2 - 6 - 2 - 2 - 6 - 6
- 2 - 2 - 0 - 10 - 2 - 2 - 6 - 6.
-
Medium speed: 2 - 2 - 6 - 6 - 6 - 2 - 10 - 0 - 6 - 6 - 2 - 2 - 6 - 6 - 2 - 6 - 6 - 2 - 2 - 10 - 0 - 6 -
6 - 2 - 2 - 10 - 10 - 0 - 6 - 6 - 10 - 10.
-
High speed: 10 - 10 - 0 - 6 - 6 - 10 - 10 - 2 - 2 - 10 - 6 - 6 - 10 - 10 - 0 - 6 - 6 - 10 - 10 - 10 - 2
- 2 - 10 - 10 - 6 - 6 - 2 - 2 - 10 - 10 - 6 - 6.
2. Sleep mode
-
The operation of this mode corresponds to that of the Natural mode.
-
If operating at low speed, it will follow the same sequence as the Natural mode and stay
at this speed.
If operating at medium speed, it will follow the same sequence as the Natural mode for 30
-
minutes; after this time, it will operate at low speed.
-
If operating at high speed, it will follow the same sequence as the Natural mode for 30
minutes; after this time, it will operate at medium speed. After another 30 minutes, it will
operate at low speed.
42
ENERGYSILENCE 1600 MOSKITO
Remote control
The remote control is provided with a battery inside. Remove the transparent film on the
battery before using the remote control. When the battery is empty, it must be replaced by
another one of the same type:
1. Locate the battery-compartment cover on the back of the remote control.
2. Open the cover.
3. Remove the used battery carefully, paying attention to its orientation and polarity.
4. Insert the new CR2025 battery, making sure to insert it in the correct direction.
5. Close the battery-compartment cover.
5. CLEANING AND MAINTENANCE
Note: always disconnect the mains plug from the mains socket before cleaning the appliance.
-
Do not immerse the device in water or splash it with any other liquid.
-
Do not use solvents or any other chemical products for cleaning. When the fan is not in use,
clean it and store it in a dry place.
-
When the fan is not in use, wipe off dust to keep it in good condition; if necessary,
disassemble the grille and remove the blades; wipe them with a soft damp cloth.
6. TECHNICAL SPECIFICATIONS
Product reference: 08196
Product: EnergySilence 1600 Moskito
Voltage: 220 - 240 V
Frequency: 50 Hz
Power: 65 W
Description
Fan maximum flow
Fan power consumption
Service value
Power consumption on standby mode
Fan sound power level
ENGLISH
Symbol
Value
Unit
F
64.25
m
/min
3
P
54.10
W
SV
1.19
(m
/min)/W
3
P
0.35
W
SB
L
64.07
dB (A)
WA
43
ENERGYSILENCE 1600 MOSKITO
Publicidad
