Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Pressure port.
4.
Pressure port.
5.
Maximum Working Pressure (MWP).
6.
Pressure full-scale (range).
7.
Power supply adaptor (see packaging list).
1.1 Connecting to PACE
WARNING
lines before disconnecting or connecting the pressure lines. Proceed with care.
Only use equipment with the correct pressure rating.
Before applying pressure, examine all fittings and equipment for damage.
Replace all damaged fittings and equipment. Do not use any damaged fittings
and equipment.
Do not exceed the maximum working pressure of the instrument.
This equipment is not rated for oxygen use.
1.2 Pressure Adaptors
Figure B1 shows the available range of PACE pressure adaptors. Refer to Table 1 and the Data
Sheet for more information.
Adaptor Part Number
IO-SNUBBER-1
IO-DIFFUSER-1
IO-ADAPT-1/4NPT
IO-ADAPT-1/8NPT
IO-ADAPT-7/16UNF
IO-ADAPT-AN4
IO-ADAPT-AN6
IO-ADAPT-BARB
IO-ADAPT-G1/4
IO-ADAPT-9/16AUTOC
Copyright 2010 Baker Hughes Company.
4 | PACE1000 Safety Instructions–English
Turn off the source pressure(s) and carefully vent the pressure
Table 1: Pressure Adaptor Specification
Specification
Restrictor/Snubber
Diffuser
ISO 228 G1/8 Male to 1/4 NPT Female.
ISO 228 G1/8 Male to 1/8 NPT Female.
ISO 228 G1/8 Male to 7/16-20 UNF Female.
ISO 228 G1/8 Male to AN4 37° Male.
ISO 228 G1/8 Male to AN6 37° Male.
ISO 228 G1/8 Male to 1/4 Hose.
ISO 228 G1/8 Male to ISO 228 G1/4 Female.
1/8 NPT Female to 9/16-18 UNF Autoclave Female.
Publicidad
