Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Set the power supply isolator to OFF.
3.
Connect the power adaptor before sliding the instrument into the rack.
4.
Set the power supply isolator to ON.
5.
Check that the front panel display shows the power-up sequence (Refer to K0470,
Section 3.2, Power-up Sequence).
5. General Specification
Item
Display
Operating temperature
Storage temperature
Ingress protection
Operating humidity
Vibration
Operating altitude
EMC
Electrical safety
Power adaptor
Pressure safety
Pollution degree
Operating Environment
Pressure media
6. Return Goods/Material Procedure
If the unit requires calibration or is unserviceable, return it to the nearest Druck Service Centre
listed at: https://druck.com/service.
Contact the Service Department to obtain a Return Goods/Material Authorization (RGA or RMA).
Provide the following information for a RGA or RMA:
•
Product (e.g. PACE1000)
•
Serial number.
•
Details of defect/work to be undertaken.
•
Calibration traceability requirements.
•
Operating conditions.
Copyright 2010 Baker Hughes Company.
8 | PACE1000 Safety Instructions–English
Specification
LCD: Color display with touch-screen
10°C to 50°C (50° to 122°F)
-20°C to 70°C (-4° to 158°F)
IP20 (EN 60529)
5% to 95% RH (non-condensing)
MIL-PRF-28800 Type 2 class 5 style E/F
Maximum 2000 metres (6560 ft)
EN 61326
EN 61010-1, UL 61010-1, CSA 22.2, No. 61010-1 and IEC 61010-1
Input range: 100 - 240VAC, 50 to 60Hz, 600 - 300mA, Installation category II
Pressure Equipment Directive - class: sound engineering practice (SEP) for
group 2 fluids.
2
Indoor use only. Not rated for use in potential explosive atmospheres.
Not rated for oxygen or other explosive gases or liquids.
Publicidad
