Publicidad
Idiomas disponibles
Idiomas disponibles
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for making separating cuts and
cut-outs in wood, plastic, metal, ceramic plates, rubber and
laminate/HPL (High Pressure Laminate) while resting firmly
on the workpiece. It is suitable for straight and curved cuts
with mitre/bevel angles of up to 45°. The saw blade recom-
mendations are to be observed.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Stroke rate preselection thumbwheel
(2) On/off switch
(3) On/off switch locking mechanism
(4) Hex key (5 mm)
(5) Extraction hose
(6) Extraction outlet
(7) Base plate
(8) Saw blade fastening screw
(9) Guide roller
(10) Saw blade
(11) Shock protection guard
(12) Hood for dust extraction
(13) Saw blade receptacle
(14) Handle (insulated gripping surface)
a)
(15) Anti-splinter guard
(16) Base plate screw
(17) Scale for mitre/bevel angles
(18) Profiled plate for base plate fastening
(19) Positioning cam
(20) Opening for positioning cam
(21) Standard hole for base plate fastening
(22) Hole for sawing close to edges
(23) Guide for parallel guide
(24) Locking screw for parallel guide
(25) Parallel guide with circle cutter
Bosch Power Tools
(26) Circle cutter centring tip
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Jigsaw
Article number
Rated power input
No-load stroke rate n₀
Stroke
Max. cutting depth
– in wood
– in aluminium
– in steel (unalloyed)
Max. cutting angle (left/right)
Weight according to
EPTA‑Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/Vibration Information
Noise emission values determined according to
EN 62841‑2‑11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 88 dB(A); sound power level
96 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841‑2‑11:
Cutting boards with saw blade T 144 D:
a
= 5.8 m/s
h,B
cutting sheet metal with saw blade T 118 A:
a
= 6.5 m/s
h,M
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
a)
This may significantly reduce vibration and noise emissions
over the total working period.
a)
a)
W
−1
min
mm
mm
mm
mm
°
kg
(triax vector sum) and uncertainty K
h
2
2
, K = 1.5 m/s
,
2
2
, K = 1.5 m/s
.
1 609 92A 89P | (22.11.2022)
English | 13
GST 680
3 601 EB4 0..
500
800–3100
20
68
10
3
45
2.0
/II
Publicidad
