•
Please observe the installation instructions provided
and note that this appliance should only be installed by a
qualified technician.
•
The appliance is fitted with a plug and must only be
connected to a properly installed earthed socket.
•
In case a new socket is needed, installation and cable
connection must only be done by a qualified electrician.
If the plug or power connection is no longer accessible
following installation, a disconnecting device must be
present on the installation site with a contact gap of at
least 3 mm.
•
Adapters, multi-way strips and extension cords must
not be used. Overloading can result in fire.
•
If the appliance is not fitted with a supply cord and a
plug, the connection equipment must have a contact
separation in all poles that provide full disconnection,
and the appliance must be incorporated in the fixed
wiring in accordance with the wiring rules.
Fitted units
•
This appliance is only intended to be fully fitted in a
kitchen.
•
This appliance is not designed to be used as a tabletop
appliance or inside a cupboard.
•
The fitted cabinet must not have a back behind the
appliance.
•
A gap of at least 45 mm must be maintained between
the wall and the base back panel of the unit above.
EN 12