Publicidad
Idiomas disponibles
Idiomas disponibles
Important
Important information for electrical
connection
Appliance is equipped with
- a power cord with plug
Please note:
Appliance is supplied with a 16A power cord with plug, and must only
be connected to a properly installed earthed socket.
Only a qualified electrician who takes the approriate regulations into
account may install the socket or replace the connecting cable. If the
plug is no longer accessible following installation, an all-pole isolating
switch must be present on the installation side with a contact gap of at
least 3 mm. Contact protection must be ensured by the installation.
Fuse protection: see instructions for use-technical data.
- a three-pin power cord
Please note:
Appliance is designed to be permanently installed with a three-pin
power cord may only be connected by a licensed expert in accordance
with the connection diagram.
Only a qualified electrician who takes the relevant regulations into
account may replace the power cord.
Do not use multiple plugs, power strips or extensions. Overloading
causes a risk of fire.
If the connection is no longer accessible following installation, an all-
pin isolating switch with a contact gap of at least 3mm must be
provided.
The appliance must be protected using a fuse that is rated 16 A or
highter. The appliance must be disconnected from the power supply
during all installation work. When the appliance is installed, protection
must be provided against accidental contact in the future.
Connect the wires of the mains power cord in accordance with the
following colour coding:
EN 16
Publicidad
