Publicidad
Idiomas disponibles
Idiomas disponibles
Ventilate the kitchen when the cleaning function is running. The
cooking compartment locks the door shortly after operation starts.
The cooking compartment cannot be opened until the temperature
reduces to a section which is relatively safe.
Pyrolysis mode end signal
An audible signal sounds continuously and the oven stops heating. It
means pyrolytic mode gets finished. You can touch the
the sounds, or the sounds will turns off automatically later.
Furnace door cannot be opened
Once the pyrolysis mode is activated, the oven will automatically lock
and the furnace door cannot be opened.
Adjusting the cleaning setting
Once cleaning starts, you cannot change any setting expect stopping.
Once the pyrolytic mode has finished
Once the cooking compartment has cooled down, use a damp cloth to
wipe off the ash that has been left behind in the cooking compartment
and around the appliance door.
After cleaning, the guard must be replaced in accordance with
instructions.
Setting pyrolytic self-cleaning mode
1.
In standby mode, select the "Pyrolytic" operating mode by turning
the left knob.
2.
Check if all the accessories and foods are removed. Close the
oven door.
3.
Touch the
Note:
1. During the pyrolytic mode, the frame on the inside of the
appliance may discolour. This is normal and does not affect
performance. The discolouration can be removed with the
help of stainless-steel cleaning agent.
2. Residue or dirt particles may cause white deposits to
remain on the enamel surfaces. This is residues from the
food and is harmless. It does not affect performance. You
can remove these residues using lemon juice or other
kinds of cleaning agents if needed.
, it means pyrolytic mode.
to start the cleaning operation.
EN 26
to turn off
Publicidad
