Publicidad
Idiomas disponibles
Idiomas disponibles
RF exposure warning
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment�
This equipment must be installed and operated in
accordance with provided instructions and the antenna(s)
used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons
and must not be collocated or operating in conjunction
with any other antenna or transmitter�
MPE caution (for mobile device under Part 15�247 &
15�407 device)
To satisfy FCC&ICRF exposure requirements, a separation
distance of 20cm or moreshould be maintained between the
antenna of this device and persons during device operation�
To ensure compliance, operations at closer than this
distance is not recommended�
To disable the Wi-Fi module on robot, follow these steps:
power on the robot, then place it on the OMNI Station,
ensuring that the Charging Contacts on robot and the
Station are properly connected� Double-click the
button�
To enable the Wi-Fi module on robot, please restart the
robot� Additionally, unplug and plug in the Station�
SAVE THESE INSTRUCTIONS
EN
8
GROUNDING INSTRUCTIONS
This appliance must be grounded� If it should malfunction
or breakdown, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock� This
appliance is equipped with a cord having an equipment-
grounding conductor and grounding plug� The plug must be
inserted into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances�
WARNING – Improper connection of the equipment-grounding
conductor can result in a risk of electric shock� Check with a
qualified electrician or service person if you are in doubt as
to whether the outlet is properly grounded� Do not modify the
plug provided with the appliance – if it will not fit the outlet,
have a proper outlet installed by a qualified electrician�
This appliance is for use on a nominal 120-V circuit and has a
grounding attachment plug that looks like the plug illustrated
as the following photo� Make sure that the appliance is
connected to an outlet having the same configuration as the
plug� No adaptor should be used with this appliance�
GROUNDING PIN
GROUNDED
OUTLET
Publicidad
