Publicidad
FUNCTIONING
3.6
Select the dose to be dispensed trough the buttons (B), (L) or (C). Lay the filter holder
on the fork (5) and push it forward so to press the micro-switch (6).
Dispensing stops when the set time is over and the grinding time returns to the original
pre-set time and the grinder is ready to work again. If the continuous mode is on (H) the
dispensing lasts the same time you keep the microswitch pressed (6).
When you release the button (6), continuous mode stops and the grinder sets back the
automatic dose selection
ATTENTION
It's possible to stop the automatic dispensing before the grinding time is over.
During dispensing, use the filter holder to press the microswitch so to stop
dispensing (6):
• Press again the microswitch (6) to restore the dispensing for the remaining
time;
• Press any dose button to stop dispensing. The grinding time comes back to
the one previously set.
44
EN
Publicidad
