Publicidad
Idiomas disponibles
Idiomas disponibles
Beveling Edges
(Fig. 1, Fig. 11, Fig. 12, Fig. 13)
The V-Grooves 14 in the Adjustable Front
Shoe 13 allow quick and easy beveling of
workpiece edges.
Depending on required bevel width, use the
corresponding V-Groove 14. For this, place
the planer with the V-Groove 14 onto the
edge of the workpiece and guide it along the
edge.
Groove to be used
None
Small
Medium
Large
Fig. 11
Fig. 13
Operating Instructions
Dimension a (mm)
0 – 4
2 – 6
4 – 6
4 – 9
Fig. 12
14
small
large
medium
Rabbeting Depth Stop
(Fig. 5, Fig. 14, Fig. 15)
The optional Rabbeting Depth Stop Acces-
sory 35 allows the user to set any rabbet-
ing depth from 0 to 11/32" (9 mm). For
best results, it is important that the Blade
18 be properly aligned. (See "Planer Blade
Alignment" on page 12.) The width of the
rabbet is controlled by the width fence. The
maximum cutting width is 3-1/4" (82 mm),
and the final depth is achieved by repetitive
cutting until the Rabbeting Depth Stop Ac-
cessory 35 contacts the Workpiece 43. The
maximum rabbeting depth is 11/32" (9 mm).
Setting the Rabbet Depth
Loosen the Rabbeting Depth Stop Accesso-
ry's Wing Knob 36 and using the depth scale
on the Rabbeting Depth Stop Accessory 35,
set the desired rabbet depth. Securely tight-
en Wing Knob 36.
Fig. 14
36
35
Fig. 15
15
43
17
Publicidad
