Publicidad
Idiomas disponibles
Idiomas disponibles
Unclogging the Shavings Exhaust
System
(Fig. 1, Fig. 3)
it becomes necessary to remove shavings.
The Blades are hidden from view and you
may be cut if blade is contacted.
To minimize the possibility of clogging,
make sure:
• The depth of cut is reasonable for the
material.
• The feed rate is reasonable for the mate-
rial. (See "Depth of Cut and Feed Rate"
on page 16.)
• Remove Battery Pack 8 from tool and
carefully insert a screwdriver or similar
object into the Shavings Ejector Port 4
to break up the clog.
Fig. 16
18
Operating Instructions
Disconnect
Recharge-
able Battery from tool if
10
10
Battery Charge Condition
Indicator
(Fig. 16)
Your tool is equipped with Battery Charge
Condition Indicator 10 lights. For a few sec-
onds after tool activation, they show the
charge condition of the battery.
Green LEDs
flashing
Capacity
> 2/3
> 1/3
< 1/3
reserve
Publicidad
