Publicidad
Idiomas disponibles
Idiomas disponibles
3 Preparing the meter for operation
After purchasing the meter, check whether the content of the
package is complete.
Before performing the measurement:
• make sure that the battery level is sufficient for measurements,
• check whether the meter casing is not damaged,
• when the meter is not in use, set the function switch in OFF position.
The device has the AUTO-OFF function triggered after
15 minutes of user inactivity. To turn the meter on again, set the func-
tion switch to OFF position and then set it at the desired function.
When using the meter, be sure to turn off the meter before remov-
ing the back cover to replace the batteries.
WARNING
Do not use the meter if the cover of battery compart-
ment is removed.
28
CMP-100 – USER MANUAL
Publicidad
