Button Hold; Hold Function; Flashlight Function; Auto-Off - Sonel CMP-100 Manual De Uso

6.4 Button HOLD

6.4.1

HOLD function

This function is used to 'freeze' the measurement result on the
display. To do this, briefly press HOLD
tion is enabled, the display shows symbol H.
To return to the normal operation mode of the device, press
HOLD button again.
6.4.2

Flashlight function

Briefly press HOLD

6.5 Auto-Off

The meter automatically shuts off after 15 minutes of user inac-
tivity. Symbol
Auto-off function may be temporarily disabled. For this purpose:
• set the rotary switch at OFF position,
• press and hold LPF button,
• set the rotary switch at the desired measuring range,
• release LPF button. When the automatic shutdown is deactivated,
the display does not show
Each pass of the rotary switch through "OFF" position with
non-pressed LPF button, will activate again the Auto-Off
function.
36
, to turn on or off the flashlight mode.
in the display indicates activated function.
.
CMP-100 – USER MANUAL
button. When the func-