Schuchmann SWANDOO MARIE INTEGRAL Manual Del Usuario página 30

EN
This child seat may not fit in every
vehicle. To find out if the seat fits your car,
check swandoo.com/car-compatibility-list
INSTALLING IN THE VEHICLE
M
2×
L
N
J
R
S
If needed, place the two ISOFIX guides
( M ) on both ISOFIX anchor points
between the seat and the backrest.
Extend the ISOFIX connectors (
pulling the ISOFIX release puller
( ) in the front of the seat. The ISOFIX
M N
connectors will slide to their outermost
position.
Position the child seat on the seat in the
car and insert both connectors into the
ISOFIX anchor points until you hear a
"click".
Check that the ISOFIX safety indicators
( ) have turned green on both sides.
J
Place both hands on the child seat and
push it against the vehicle seat until it is
firmly positioned and tight to the seat.
Push the support leg's adjustment button
( ) and slide the leg downwards until it
T
T reaches the floor of the vehicle. The leg
( ) should be firmly pushed on the
Q R
ground until the indicators (
) by
K L
) turn green.
R S
30