FitEngine QSF098 Manual Del Usuario página 17

The display shows the mode and inten-
sity, but no pulses for muscle stimula-
tion are emitted.
The silicone pads in the belt (1) are not
fi tted correctly.
► Keep changing the position of the
silicone pads until the spot with the
strongest muscle contraction has
been found.
The intensity level is set too low.
► Increase the intensity level.
The silicone pads are dirty.
► Clean the silicone pads.
The battery is too weak.
► Charge up the battery.
Technical Data
Article number:
ID of operating instructions: Z 05022 M FE V2 0121 uh
Remote Control
Model number:
Voltage supply:
Operating Element
Model number:
Voltage supply:
Charge time:
Operating time:
Mains adapter required:
Protection class:
All rights reserved.
Disposal
05022
QRM-01
3.7 V DC (1 x Li-ion battery, 150 mAh)
QSF098
3.7 V DC (1 x Li-ion battery, 150 mAh)
approx. 1 h
approx. 150 min; automatic switch-off after 15 min
5 V and ≥1 A
III
Dispose of the packaging material
in an environmentally friendly man-
ner so that it can be recycled.
Batteries should be removed from
the remote control prior to disposal
of the device and disposed of sep-
arately from the device at suitable
collection points.
This device is governed by the
European Directive 2012/19/EU
on waste electrical and electron-
ic equipment (WEEE). Do not
dispose of the operating element
with a built-in battery as normal
domestic waste, but rather in an
environmentally friendly manner
via an offi cially approved waste
disposal company.
EN
17