Elite Xtreme XBEA20 Manual De Usuario página 40

X B E a 2 0
Keep Working
ELECTRICAL SAFETY
1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electricshock.
2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
5. When operating a power tool outdoors, use an extension cord suitable for outdoor use. use of a cord suitable for outdoor use
reduces the risk of electric shock.
6. If operating a power tool in a damp location is unavoidable, use a residual currentdevice (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
7. Power tools can produce electromagnetic fields (EMF) that are not harmful to the user. However, users of pacemakers and
other similar medical devices should contact the maker of their device and/ or doctor for advice before operating this power tool.
PERSONAL SAFETY
1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result
in serious personal injury.
2. Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety
shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
3. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch
on invites accidents.
4. Remove any adjusting key or wrench before turning the power tool on.A wrench or a key left attached to a rotating part of the
power tool may result in personalinjury.
5. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected
situations.
KEEP WORKiNG 06