Publicidad
Idiomas disponibles
Idiomas disponibles
X B E a
2 0
Keep Working
Operation with abrasive cut-of fwheel
Optional accessory
WARNING:When using an abrasive cut-off wheel, be sure to use only the special wheel guard designed for use with cut-off
wheels. (In some European countries, when using a diamond wheel, the ordinary guard can be used. Follow the
regulations in your country.)
WARNING: NEVER use cut-off wheel for side grinding.
WARNING: Do not "jam" the wheel or apply excessive pressure. Do not attempt to make an excessive depth of cut. Overstressing
the wheel increases the loading and susceptibility to twisting or binding of the wheel in the cut and the possibility of kickback,
wheel breakage and overheating of the motor mayoccur.
WARNING: Do not start the cutting operation in the workpiece. Let the wheel reach full speed and carefully enter into the cut
moving the tool forward over the workpiece surface. The wheel may bind, walk up or kickback if the power tool is started in the
workpiece.
WARNING: During cutting operations, never change the angle of the wheel. Placing side pressure on the cut-off wheel (as in
grinding) will cause the wheel to crack and break, causing serious personal injury.
WARNING: An abrasive cut-out wheel shall be operated perpendicular to the material being cut.
NOTE: If the tool is operated continuously until the battery cartridge has discharged, allow the tool to rest for 15 minutes before
proceeding with a fresh battery.
KEEP WORKiNG
26
Publicidad
