Publicidad
Idiomas disponibles
Idiomas disponibles
X B E a
2 0
Keep Working
1
1. Wheel guard for cutting
Installing or removing grinding wheel
Optional accessory
NOTE: Use grinding wheel specified in this manual.
WARNING: When using a grinding wheel, the wheel guard for grinding must be fitted on the tool so that the closed side of the
guard always points toward the operator.
CAUTION: Make sure that the mounting part of the inner flange fits into the inner diameter of the grinding wheel perfectly.
Mounting the inner flange on the wrong side may result in the dangerous vibration.
To install the grinding wheel, perform the following steps:
1. Mount the inner flange onto the spindle. Make sure to fit the dented part of the inner flange onto the straight part at the bottom
of the spindle.
2
3
1
KEEP WORKiNG
21
Publicidad
