KitchenAid KES6403 Guía De Producto página 13

PROGRAMING THE WATER TEMPERATURE AND WATER
HARDNESS
1.
To change pre-programed Water Temperature: Toggle the Mode Button to select
Espresso, press and hold for 3 seconds. The indicator lights will show the default factory
setting or previous saved setting (use "Indicator Light Chart" for reference). Toggle the
Mode Button between Low-Mid-High to select desired temperature. To save your
selection, press "
2.
To change pre-programed Water Hardness: Toggle the Mode Button to Water, Press
and hold for 3 seconds. The indicator lights will show the default factory setting or previous
saved setting (use "Indicator Light Chart" for reference). Toggle the Mode Button between
Low-Mid-High to select desired water hardness. To save your selection, press "
button or wait for 10 seconds.
INDICATOR LIGHT CHART
WATER
TEMPERATURE OR
WATER HARDNESS
Low
Medium
High
NOTE: Water Hardness - Low: 0 to 60 ppm
Medium: 60 to 120 ppm
High: more than 120 ppm
" button or wait for 10 seconds.
1 2
1 2
1 2
1 2
"
13