KitchenAid KES6403 Guía De Producto página 15

4.
Clean the Steam Wand after every use. Toggle the Mode button to select Water. Position
the Steam Wand over Drip Tray or into a cup. Press "
Press " " button to stop. Wipe down Steam Wand exterior with a soft damp cloth.
NOTE: To remove the Steam Wand press the Steam Wand Release Button.
DESCALING THE ESPRESSO MACHINE
The descaling program enables simple and effective descaling of your Espresso Machine.
Descale the Espresso Machine regularly, but a minimum whenever the "Clean (
is blinking. The frequency of descaling depends on the hardness of the water in your region.
Therefore, it is important to program the Espresso Machine according to the water hardness
level of your location.
NOTE: The descaling process runs in 4 phases, takes approximately 10 minutes and must be
completed before next use. At any time during the descaling program you can pause the cycle
by pressing " " button. And, resume too by pressing "
IMPORTANT: Only use descaling solution intended for Espresso Machines.
SET UP OF GROUP HEAD DESCALING
1.
Fill 8.5 oz water and 4.25 oz descaling solution inside the Water Tank.
NOTE: The clean cycle is designed to run as per the above mentioned water and
descaling solution volumes. The cycle cannot be completed with any less volume than
mentioned above.
A
B
A. Water
B. Descaling solution
" button, wait 3 to 5 seconds.
" button.
)" indicator
15