Assembling The Unit - Stihl KB-KM Manual De Instrucciones

Assembling the Unit

Pull the protective caps off the ends
N
of the drive tube and keep them in a
safe place for later use – see
"Storing the Machine".
NOTICE
The plug may come out of the drive tube
when you pull off the cap. Push it back
into the drive tube as far as stop.
KB-KM, KW-KM
Mounting the deflector
Apply a mark at distance A (5 in,/
N
125 mm) from the end of the drive
tube.
2
1
3
1
Loosen the clamp screws (1) and
N
push the deflector (2) onto the drive
tube (3) and beyond the mark
(arrow). Then pull the deflector back
until it is flush with or just covers the
mark (arrow).
Line up the deflector so that it is
N
vertical and the fixing lug (arrow) on
the drive tube points up (upper
magnified arrow).
Tighten down the clamp screws (1)
N
firmly.
WARNING
Check that the deflector is secure – it
must not be possible to rotate it on the
drive tube.
Mounting the Gearbox
Remove both sweeping
N
attachments – see "Replacing the
Sweeping Attachmenrs".
4
3
Push the sleeve (4) onto the drive
N
tube (3) as far as stop.
English
11