REMIS REMIfrontIV-D Instrucciones De Montaje página 10

B30
US/GB
B32
B34
B36
B38
B40
B42
B44
10/32
B31
B32:
B33
Connect the cables to the loudspeakers (see arrow).
B33+B34:
Position the cladding on the A-column and clip into
place using the designated clips. Ensure that they
connect to the roof interior cleanly. Push the rubber
seal back on.
B35:
B35
Push the panel into the upper right of the cladding and
place on the roof interior as shown. Ensure that the
transition in the overlap area is clean. Close the plissé
to test.
B36:
B37
Drill holes of 6mm diameter through the holes in the
panels in the roof interior.
B37+B38:
Fix panels to the roof interior using the enclosed screw
dowels.
B39:
B39
Push the panel into the upper left of the cladding and
place on the roof interior as shown. Ensure that the
transition in the overlap area is clean.
B40-B42:
B41
Fix panels to the roof interior using the enclosed screw
dowels.
B43-B45:
B43
Close plissé to determine position for lower pipe bra-
cket. Fix bracket in this position using adhesive tape in
the middle of the dashboard. Screw pipe bracket using
two SK 4.2x13 screws onto the dashboard.
B45