REMIS REMIfrontIV-D Instrucciones De Montaje página 9

B16 B17
B18 B19
B20
B21
B22
B23
B24
B25
B26 B27
B28 B29
B16:
Place pre-mounted front system on the A-column as
shown.
B17:
Mount the front system on the A-column in the position
shown. Ensure that the clips slot in properly.
B18:
Push the rubber seal back on.
B19+B20:
Screw the thread site of the upper (short) and lower
(long) guide pipe on the upper or lower parts of the left
cladding respectively (do not tighten).
B21:
Push bracket pipe as shown onto the lower guide line to
the middle.
B22+B23 (Option bottom panel):
At the option bottom panel push the right bottom panel
instead of the bracket pipe onto the lower guide line to
the middle.
B24-B26 (Option bottom panel):
Arrange the left bottom panel with the right one as
shown in the photo. Screw both panels together with
the dashboard (B25+B26).
B27:
Push upper right panel onto the upper guide pipe as
shown.
B28-B31:
Screw on dowel side of the lower (long) or upper (short)
guide pipe onto the lower right or upper right A-column
cladding using the SK3.0x16 screw respectively.
US/GB
9/32