KitchenAid 5KES8556 Manual Del Propietário página 9

RINSING THE FROTHER: EASY MILK RINSING
After you make milk based drinks, the Display instructs you to rinse the frother. This should be
done as soon as possible, but at the latest before switching off the machine.
1.
Select and confirm the instruction or in the " " menu, select the menu option
"Easy Milk Rinsing".
2.
Connect the supplied Milk Hose with one end to the dispenser outlet and put the other end
in the Drip Tray, and confirm on the Display.
3.
Place a sufficiently large container (≥ 0.5 L) under the dispenser outlet and confirm on the
Display.
4.
The machine starts the rinsing process. As soon as the rinse cycle is ended, the machine
heats up and is then ready for operation again.
NOTE: Rinsing the milk frother after each use is important to avoid milk build up.
CLEAN FROTHER: DEEP MILK CLEANING
1.
Select and confirm the message on the Display or in the " " menu, select the menu option
"Deep Milk Clean".
2.
Add milk cleaning system specific detergent and water in a container (at least 0.3 L).
Please observe the instructions of the detergent manufacturer for the mix ratio.
3.
Follow the instructions on the Display up to the end of the program and confirm each time.
The machine then heats up and is ready for operation again.
DESCALING
A message is shown on the Display when the machine has to be descaled. The descaling
program can also be started manually at any time. Beverages can still be drawn, but it is
recommended to complete the cleaning program as soon as possible.
Descaling agents are known to stain the steel parts of the machine. Ensure that you have a
large container under the Brew Unit to avoid splashing and spills. If stain occurs, make sure to
use an oxalic acid or citric acid product to remove properly. When applying cleaner, rub with
the grain and rinse properly after cleaning. For a nice shine, add stainless cleaner after
cleaning.
1.
Select and confirm the instruction or press the " " icon and select the "Descaling" by
pressing the " " icon.
2.
Place a sufficiently large container (≥ 0.5 L) under the Dispenser. Follow the instructions
on the Display up to the end of the program.
3.
The machine then heats up and is ready for operation again.
IMPORTANT: The running descaling program must not be interrupted. Do not use vinegar or
vinegar-based materials for descaling, but use products recommended for fully automatic
coffee machines. The filter (if present) must be removed from the Water Tank prior to the start
of the descaling program.
During descaling, please follow exactly the sequence of the displays:
� First pour in the corresponding amount of water up to the 0.5 L mark and then add the
descaler.
� Observe the instructions from the descaler manufacturer.
BREW UNIT CLEANING - 2-PHASE BREW UNIT CLEANING
PROCESS
The brewing unit should be removed and cleaned under running water as needed and before
each cleaning program. Please do not use detergent, only cold water.
1. Select and confirm the instruction. Empty the trays. Fill the Water Tank to max fill line
(2.2 L). Place a sufficiently large container (≥ 0.5 L) under the Dispenser. Follow the
instructions on the Display up to the end of the first phase.
9