Publicidad
Idiomas disponibles
Idiomas disponibles
• When you purchase your Ronin TL new the ID Plate will show the year of manufacture. Your first annual inspection will be
12 months after the first date of use. Date of Manufacture will show the Month followed by the year (ie: 05/2020).
• Your first inspection due date will be listed in the first column showing month followed by the year (ie: 06/20). The second
column will be the date the inspection was completed showing the month followed by the year (ie: 06/20). The next
inspection due will be filled in by the service center after each annual service is completed.
• Your Ronin TL will have an ID Plate for Ronin service locations to keep track of active service bulletins. This plate will be
located just above the battery connector on the inside of the Ronin TL's main housing. If you Ronin does not have this plate,
then do not worry. The next time you send your Ronin in for service, then the plate will be added and updated accordingly.
With our worldwide network of certified repair locations, this assures you can send your Ronin to any location and the most
current service updates will be completed
For users operating where CE certification is required...CE requires a duty cycle to ensure the device housing does not exceed
temperatures defined by CE certification requirements as unsafe. The max CE permitted temperature is 129 °F (54 °C) in which
skin can touch metal and not be burned. To meet this requirement please do not exceed the duty cycle described below:
• The Ronin TL can ascend 200 ft. of rope continuously in 100 °F (38 °C) temperature with max load of 400 lbs. (181Kg).
• Followed by a 30 min. rest and an additional 50 ft. (15m) can be ascended.
• The 30 min. rest and additional 50 ft. (15m) of ascent can be performed 3 additional times after the initial 200 ft.
(61m) of ascent.
Then unit needs to cool down back to 100 °F (38 °C) temperature. The duty cycle may be performed one additional time per day.
After 5 years of service, the Ronin's service life is complete. Service life is based on time, which is defined by how many annual
services the lift has received. A Ronin's service life is complete 12 months after the 4th annual service. Your annual services will
be marked on the Ronin's id Plate, by the certified repair center that performed the service. If the Ronin does not need to be
returned, because it falls under one of the Annual Service Exceptions, then the life of a Ronin can be extended up to 10 years.
The service life of a Ronin cannot exceed 10 years under any circumstances. The Ronin TL is made of many materials that may
be recycled. The battery contains lithium-ion materials, and the lift contains aluminum. The speed controller contains solder and
electrical components. Ronin products can be recycled for free in the United States and Canada by dropping the product off at
any number nationwide recycling locations.
Ronin products and accessories are guaranteed against manufacturing defects for 12 months from the original date of purchase
or the minimum legally mandatory country requirement, from the original date of purchase. In the event of such defects, Ronin
will repair or replace the defective part(s) or product(s) with comparable parts or products at Ronin's sole discretion. Damage
resulting from use, water intrusion, physical damage, or normal wear and tear is not covered by this or any warranty. Ronin
assumes no liability for any accident, injury, death, loss, or other claim related to or resulting from the use or misuse of any
products. In no event shall Ronin be liable for incidental or consequential damages relating to or resulting from the use of this
product or any of its parts. This product is not warrantied against user repairs and user repairs will void the warranty. Breaking
the seal on the Ronin cover also results in immediate loss of warranty. Returns or replacements of parts and/or products may be
subject to shipping, handling, replacement, and/or restocking fees.
If you have purchased your product(s) from an authorized Ronin distributor, then please contact the distributor for warranty
claims.
ID PLATE SERVICING INFORMATION
RONIN TL DUTY CYCLE
END OF LIFE
RONIN WARRANTY
1491 Old North Main Street, Clover, SC 29710
roninpowerascender.com | info@roninascenders.com
657-444-2557
Publicidad
