Publicidad
Idiomas disponibles
Idiomas disponibles
9 MAINTENANCE
9.1 GENERAL INFORMATION
1. During use and storage, carefully observe the recommendations listed in this manual in
order to prevent possible damage or dangers during use
2. Do not use the instrument in environments with high humidity levels or at high
temperatures. Do not directly expose to sunlight
3. Always turn off the instrument after use. Never remove the front panel of the
instrument. The instrument don't need any particular maintenance.
9.2 RECHARGING INTERNAL BATTERY
When the LCD displays the symbol "
Only expert and trained technicians should perform maintenance operations.
Before carrying out this operations, make sure you have disconnected all
cables from the input terminals
1. Fit the power cord in the Europlug socket (see Fig. 1 – part 2) with no measurements
performed by the instrument
2. The "
" symbol is shown at display to indicate the running of recharging process
3. Leave the instrument until the "
charge is possible to perform measurements
9.3 CLEANING THE INSTRUMENT
To clean the instrument, use a soft dry cloth. Never use humid cloths, solvents, water, etc.
9.4 END OF LIFE
CAUTION: the reported symbol indicates that the appliance and its accessories
must be disposed of separately and treated correctly.
", it is necessary to recharge the battery.
CAUTION
" symbol is shown at display. With the battery on
EN - 27
HT7051 - HT7051N
Publicidad
