Publicidad
Idiomas disponibles
Idiomas disponibles
When installing, commissioning, operating, and maintaining the product, strictly observe relevant safety instructions. Improper use or
misoperation may result in:•
third party.Strictly follow the safety instructions stated in the manual to avoid the hazards mentioned above.
• The safety instructions in this manual are only supplements and cannot cover all the precautions that
should be followed. Perform operations considering actual on-site conditions.
• APsystems shall not beheld liable for any damage caused by violation of general safety operation
requirements, general safety standards, or any safety instruction in this manual.
1.Understanding Safety Sign
Read the instructions before performing any operations on the product.
Do not dispose of the equipment as household waste.
2.General Safety Instructions
Regulatory Requirements：
•
All operations related to the product must comply with relevant laws and regulations of the country or region.
•
Ensure all safety labels on the product remain clear and visible throughout the entire product life cycle. Do not remove, paint over, block or
damage any labels or nameplates on the product.
Personnel Requirements
DANGER：Operators are strictly prohibited from wearing watches, rings, necklaces or other conductive items, which may cause electric shock
burns.
WARNING：If any condition or malfunction that may endanger personal safety or damage equipment is found during operations related to the
product, stop operations immediately and do not continue using the product.
•
Only trained and authorized personnel may operate and maintain the product.
•
Operators must understand the correct use of tools and be familiar with all safety precautions mentioned in this manual.
Environmental Requirements
DANGER：Do not use or place the product in flammable, explosive or corrosive gas environments.
WARNING：Do not operate the product in severe weather such as thunderstorms, rain, snow, Level 6 or stronger winds, including but not
limited to transportation, installation, electrical connection, power-on, maintenance and high-altitude operations.
WARNING：In case of fire, evacuate the building or product area and call the fire department. Do not re-enter the burning area.
NOTICE：Dust and moisture may damage the product!
•
Take appropriate measures such as keeping the product clean and dry if installation or electrical connection needs to be interrupted.
•
Ensure there are no heat sources or flames near the product to prevent overheating or malfunctions.
•
Ensure there are no obstructions around the product, maintaining enough ventilation and heat dissipation space.
•
Ensure there are no liquids around the product and it is far from areas where liquids may be present to avoid risks of short circuits and
electrical faults.
•
Avoid using equipment in environments with smoke, dust or other particulate matter.
•
Ensure that the product does not interfere with other devices or is affected by interference when operating in an electromagnetic field
environment.
•
Ensure the working environment temperature and humidity for the product are within specified ranges.
3.General Safety Instructions
DANGER：Improper installation may cause fire hazards!
•
Make sure the product has no electrical connections before installation.
•
Prevent foreign objects from entering the interior of the product during installation.
WARNING：Modification of the product without authorization is strictly prohibited. Unauthorized modifications may lead to serious safety risks,
damage product performance, and even cause personal injury.
4.Operation and Maintenance Safety
WARNING：Improper maintenance may cause personal injury or product damage!
• Check the warning labels on the enclosure and follow label requirements.
• Confirm that the product, associated external devices, or circuit connections are safe.
• For products that have been powered off for an extended period, a comprehensive inspection must be carried out before powering on, and
they can only be put back into use after being checked and tested by qualified personnels.
Safety Instructions
Injury or death to the operator or a third party.•
Damage to the product or the property of the operator or a
1
EN
Publicidad
