APsystems ECU-R Guía De Instalación Rápida página 5

Step 3: Initialize the ECU.
Note: If you have an installer, contact your installer to get the company code to access your installer's after-sales O&M services.
1.After registration, click "Initialize ECU" to start initializing the ECU. Before initializing the ECU, please go to the Wi-Fi settings on your phone
and connect your phone's Wi-Fi to the ECU hotspot that needs to be initialized.
2.Inverter Binding: Make sure your phone is connected to the ECU hotspot via Wi-Fi, then click "Next", verify the correct Inverter ID that needs
to be bound to the ECU, and click "Binding" to bind these inverters to the ECU. Go to the "Inverter" interface to check the system's operating
status.
4 EN 5 EN