WAGNER STEAMFORCE SPEED PRO Guia Del Usuario página 22

EN
before attempting to use.
Do not stand on or place objects onto the unit or steam hose. Never over-
twist or make kinks in the steam hose and never block the valve. Only carry
the device by the handles provided.
The device must be kept out of the reach of children whenever it is switched
on or cooling down.
Never overfill the unit. Unplug the unit in the event of overfilling or a fault.
Use only WAGNER original spare parts and accessories!
Caution! Danger of short-circuits! Cover socket-outlets and switches and
do not subject them to steam. When using an extension cable: max.10m
long – the cord cross-section must be at least 3 x 1,5 mm
When working in the vicinity of wood / gypsum bases and coated materials
these can be impaired by heat or steam. Remedy: Use a heat / steam shield
made of cardboard or metal. The device must never be left unsupervised
while it is plugged into the mains power supply. Keep the unit away from
children and animals.
Maximum weight for standing on the unit is 150 kg and no more
than 1 person at a time. Ensure a safe stand.
Do not permit oil, grease or slippery material to accumulate on the step/platform.
Do not allow objects to accumulate on the step/platform.
Do not use a ladder or other device on the step to get greater heights.
Do not apply impact loads on the step/platform.
5. Intended use
The Steam Wallpaper Stripper is solely suited to removing wallpaper. The device
may only be used indoors.
To ensure long life of the steam wallpaper stripper, unplug and clean your unit immediately
and thoroughly after each use.
CAUTION! - Steam can loosen weak, cracked, porous or poorly bonded plaster. Check
a small area before starting work. Do not hold the steamplate in one position too long
and stop if plaster starts to break.
PROTECT YOUR HOME - To prevent marks from steam on carpets and soft furnishings
it is recommended the unit be place on a hard flat board. Ensure the unit will not slip or
tilt. Dust sheets and newspapers are not suitable.
•
Supply cord must be connected to a grounded (3 prong) mains socket-
outlet.
•
Arrange replacement of a worn or damaged supply cord.
NEVER repair a supply cord.
22
SteamForce Speed Pro
. Avoid damage!
2