WAGNER STEAMFORCE SPEED PRO Guia Del Usuario página 28

EN
17. Accessories
Further information about the WAGNER range of products for decorative preparation is
available on www.wagner-group.com.
18. Environmental protection
The tool and all accessories and packaging have to be recycled in an
environmentally friendly manner. Do not dispose of the tool with household
waste. Support environmental protection by taking the tool to a local collection
point or obtain information from a specialist retailer.
WARNING (UK ONLY)
Mains Connection 230V
Your unit has been supplied with a supply
cord and a fitted plug. This is identified
by the fuse holder in the base of the plug.
Please read the following safety instructions
before use.
1. If the fitted plug is cut off from the supply cord then the plug must be disposed of safely.
NEVER
2. under any circumstances insert such a plug into a 13 Amp socket-outlet.
NEVER
3. under any circumstances use the appliance or supply cord without the fuse
cover fitted. This is the little cover fixed into the base of plug to hold the fuse in place.
4. If you lose the fuse cover then please contact any electrical dealer for a replacement or
ring our helpline above.
5. A replacement fuse must be rated at 13 Amps and approved to BS1362.
IF IN ANY DOUBT PLEASE CONSULT A QUALIFIED ELECTRICIAN.
If you need to fit a plug to the supply cord, this should be fitted in accordance with the
wiring instructions below, and will need to be used with a 13 Amp fuse. If in doubt consult a
qualified electrician.
EU Declaration of conformity
We declare under sole responsibility that this product conforms to the following
relevant directives:
2014/35/EU, 2014/30/EU, 2011/65/EU, 2012/19/EU
Applied harmonised standards:
EN 60335-1, EN 60335-2-54, EN IEC 55014-1, EN IEC 55014-2, EN IEC 61000-3-2,
EN 61000-3-3, EN 62233
The EU declaration of conformity is enclosed with the product.
If required, it can be re-ordered using order number 2450631.
28
SteamForce Speed Pro